Fire &
Safety
Systems.
Full-scope fire fighting contracting across Dubai and the UAE — sprinkler systems, FM200, fire alarm, hose reels, pumps, emergency lighting, and complete Civil Defence NOC coordination for every project type.
Fire Fighting & Safety Systems
Civil Defence-compliant fire protection —
installed correctly, signed off without delays
Fire protection is not an area where shortcuts are acceptable. A system that fails inspection delays your Certificate of Occupancy. A system that underperforms in an emergency has consequences that go far beyond project cost. PowerCraft MEP treats every fire system installation — from a small server room FM200 unit to a 500-room hotel sprinkler network — with the same technical rigour and zero-compromise approach.
We carry direct registration with Dubai Civil Defence and operate across all authority zones — Dubai Municipality, Trakhees, DIFC, DDA, and DMCC. Our in-house engineers are trained in NFPA 13, NFPA 72, and DCD-specific requirements, and our coordination team manages the complete approval workflow from design submission through to final NOC sign-off.
We also deliver the full scope of special hazard protection — FM200 and Novec 1230 for data rooms, kitchen hood suppression for commercial kitchens, ESFR sprinklers for high-rack warehouses, CO monitoring for car parks, and fire alarm integration across all building types. Every system is documented, tested, and handed over with complete commissioning records.
Scope Includes
- ✓Fire Fighting Pipe Works
- ✓Wet Pipe Sprinkler Systems
- ✓Dry Pipe & Pre-Action Systems
- ✓Fire Hose Reel Systems
- ✓Hydrants & Landing Valves
- ✓Fire Pump Room Installation
- ✓FM200 & Novec 1230
- ✓Addressable Fire Alarm
- ✓Emergency Lighting & Exit Signs
- ✓Kitchen Hood Suppression
- ✓ESFR High-Rack Systems
- ✓DCD Approvals & NOC
What We Cover
Comprehensive
Fire Protection
Every fire suppression, detection, and evacuation system type — one certified contractor, one NOC process.
01
Fire Fighting Pipe Works
Schedule 40 and 10 steel pipework, grooved fittings, hangers, and supports — correctly routed and coordinated with structural, HVAC, and electrical systems across all floor levels.
02
Sprinkler Systems
Wet, dry, and pre-action sprinkler systems to NFPA 13 and Dubai Civil Defence specifications — with full hydraulic calculation packs and DCD design approval managed in-house.
03
Fire Hose Reel Systems
Hose reel cabinets, landing valves, internal and external hydrants — with pressure testing, witness inspection support, and DCD compliance sign-off.
04
Fire Pump Systems
Duty, standby, and jockey pump sets, pressure vessels, alarm panels, and piping connections — with automatic starting, electrical power coordination, and weekly test programming.
05
FM200 & Clean Agent
Fast-acting, residue-free suppression for server rooms, data centres, switch rooms, and control panels — FM200, Novec 1230, CO₂ — with DCD design approval and cylinder weight verification.
06
Fire Alarm Systems
Addressable panels, heat and smoke detectors, manual call points, sounder beacons — to BS 5839 and DCD requirements, with full zone mapping and commissioning records.
07
Emergency Lighting & Evacuation
Emergency luminaires, exit signs, evacuation control, and voice alarm integration — documented and tested for DCD inspection readiness and building handover.
08
Civil Defence NOC
End-to-end DCD submission management — design approvals, calculations, material submittals, inspection bookings, witness attendance, snag clearance, and full NOC documentation.
How We Work
Our Fire System
Delivery Process
Site Inspection
We inspect the site, review drawings, assess existing fire system conditions, and determine the correct system strategy and authority path.
Scope & BOQ
Detailed fire fighting scope, BOQ, material schedule, and quotation — with pipe routes, sprinkler layouts, pump requirements clearly itemised.
DCD Submission
Hydraulic calculations, schematics, and submittals prepared and submitted directly to Dubai Civil Defence — with comments managed until design approval.
Installation
Certified technicians execute pipe works, sprinkler installation, hose reels, alarm cabling, and detectors — coordinated with all MEP trades on site.
Testing & NOC
Pressure testing, functional alarm commissioning, pump performance, DCD witness inspection, and complete NOC documentation issued at handover.
Who We Work With
Fire Systems for Every Sector
Serving all UAE — Dubai · Abu Dhabi · Sharjah · Ajman · RAK · Fujairah · UAQ
Technical Overview
Fire Suppression & Safety Systems in Dubai & UAE
Fire Sprinkler Installation Dubai — NFPA 13 & DCD Compliant
Wet pipe sprinkler systems remain the primary active fire suppression method for commercial, residential, and hospitality buildings across the UAE. PowerCraft MEP designs, installs, and commissions sprinkler systems to NFPA 13 and Dubai Civil Defence specifications — including full hydraulic calculations, pipe schedule selection, sprinkler head positioning, and design approval management. We cover all system types: wet pipe, dry pipe, pre-action, and deluge — with hanger installation, pressure gauge fitting, inspector’s test connections, and full witness testing documentation. All sprinkler installations are coordinated with the HVAC ducting and ceiling trade to prevent clashes before first fix.
FM200 & Clean Agent Fire Suppression Systems Dubai
FM200 (HFC-227ea) and Novec 1230 clean agent systems are the standard fire suppression solution for data centres, server rooms, telecommunications rooms, electrical switchrooms, and control panels across the UAE — where water-based systems would cause catastrophic equipment damage. PowerCraft MEP designs and installs complete clean agent suppression systems: cylinder manifolds, discharge nozzles, agent quantity calculations, room integrity testing, abort station wiring, and full DCD design approval management. We are experienced with both FM200 and Novec 1230 agent systems and can advise on the correct agent selection based on room volume, equipment value, and DCD zone requirements.
Dubai Civil Defence Approvals & NOC Coordination
Obtaining a Dubai Civil Defence NOC requires a structured submission process that many contractors underestimate. PowerCraft MEP manages the complete DCD approval lifecycle — pre-design consultation, preliminary drawings, hydraulic calculations, material submittals, technical comment responses, site inspections, deficiency clearance, and final NOC sign-off. We have an in-house team dedicated to DCD coordination who maintain active relationships with DCD inspectors, understand the latest technical circular requirements, and track submission status actively to prevent delays. Our DCD NOC success rate on first inspection reflects the quality of installation and documentation we bring to every project.
Addressable Fire Alarm Systems & Emergency Lighting UAE
An effective fire alarm system does more than detect smoke — it initiates the correct sequence of life-safety actions across the building: activating smoke control, releasing door holders, alerting the BMS, and enabling safe evacuation. PowerCraft MEP installs addressable fire alarm systems to BS 5839 and DCD requirements, covering panel specification, detector type selection, manual call point positioning, sounder beacon zoning, and integration with HVAC smoke control and electrical emergency power systems. Emergency luminaires and exit signs are installed, tested, and documented to meet DCD inspection requirements with 3-hour battery backup duration testing included in our commissioning pack.
Common Questions
Fire & Safety
FAQ
Short answers for clients planning fire system installation, DCD approvals, maintenance, or project handover across the UAE.
WhatsApp Us →Do you provide fire fighting works across all UAE emirates?
Yes — PowerCraft MEP provides fire fighting and safety systems contracting across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, and Umm Al Quwain for all building types.
What fire fighting works do you cover?
We cover fire fighting pipe works, sprinkler systems, hose reel systems, fire pump rooms, FM200 and clean agent suppression, fire alarm systems, emergency lighting, evacuation systems, and full Civil Defence NOC coordination.
Do you handle Dubai Civil Defence approvals directly?
Yes. We manage all DCD design submissions, hydraulic calculations, material submittals, inspection bookings, site witness attendance, snag clearance, and NOC sign-off — removing this burden from the main contractor.
Can you handle fire system works for fit-out projects?
Absolutely. We regularly deliver fire system fit-out works for restaurants, cafes, retail shops, offices, supermarkets, hotels, and villa renovations — including DM and DCD compliance coordination for the specific zone.
Do you offer fire system maintenance after installation?
Yes. We provide AMC packages covering quarterly sprinkler inspections, annual fire alarm servicing, suppression agent weight checks, hose reel testing, pump performance checks, and emergency fault response.
How do I get a quotation or site inspection?
Share your project location, building type, drawings, existing system photos, and required scope via WhatsApp or our contact page. We respond within 24 hours and arrange a site visit where needed.
Ready to Protect
Your Project?
Share your project drawings, building type, and scope — we'll respond with an initial assessment within 24 hours and arrange a site visit where needed.